SW137069
Testo 160 IAQ WiFi Data Logger for Indoor Air Quality
The Testo 160 IAQ WiFi Data Logger for Indoor Air Quality is used for monitoring indoor air quality. With sensors for temperature, humidity, CO2 and atmospheric pressure, it accurately determines the ambient conditions in each room. It can be used in rooms where a lot of people gather like schools, nursery schools, conference rooms, open-plan offices, auditoriums or museums.
Coloured LEDs on the data logger indicate the air quality using the traffic light principle. The CO2 limit values can be determined individually. The LEDs are switched off in battery mode in order to ensure longer battery lives.
The following values can be read off the logger display:
- With mains operation: CO2 concentration and alternately temperature and humidity. The atmospheric pressure values are not shown on the logger display, however they are available in the Cloud
- In battery mode: CO2 concentration and temperature. The data for humidity is not displayed to save on battery life.
All measurement data is transmitted directly to the Testo Cloud (online data storage) via wireless LAN. These readings can be accessed at any time and anywhere, using an internet-enabled smartphone, tablet or PC. There is also an alarm function to receive immediate warnings by e-mail or SMS (optional in conjunction with an Advanced licence) when limit values are violated.
- Ideal for monitoring indoor air quality (IAQ)
- Blends in perfectly with the surroundings with its customisable cover (see SW137075 Testo 160 IAQ Deco-Cover)
- Simple to install, integrate and operate – particularly user-friendly with air quality displayed in the form of a traffic light system
- Perfectly networked: data storage in the Testo Cloud, real-time alarm via email or SMS (optional in conjunction with an Advanced licence)
SPECIFICATIONS:
Humidity - Capacitive
| Measuring range | 0 to 100 %RH (non-condensing) |
|---|---|
| Accuracy | ±2.0 %RH at +25 °C and 20 to 80 %RH ±1.0 %RH / year drift ±1.0 %RH hysteresis ±3.0 %RH at +25 °C and < 20 and > 80 %RH |
| Resolution | 0.1 %RH |
Absolute Pressure
| Measuring range | 600 to 1100 mbar |
|---|---|
| Accuracy | ±3 mbar at +22 °C |
| Resolution | 1 mbar |
Ambient COâ‚‚
| Measuring range | Ambient humidity: 0 to 99 %RH (non-condensing) 0 to 5000 ppm |
|---|---|
| Accuracy | ±(50 ppm + 3 % of mv) at 25 °C Without external power supply: ±(100 ppm + 3 % of mv) at 25 °C |
| Resolution | 1 ppm |
Temperature
| Measuring range | 0 to +50 °C |
|---|---|
| Accuracy | ±0.5 °C |
| Resolution | 0.1 °C |
General technical data
| Weight | 269 g |
|---|---|
| Dimensions | 117 x 82 x 32 mm ((LxWxH)) |
| Operating temperature | 0 to +50 °C |
| Product-/housing material | PC - ABS |
| Protection class | IP20 |
| Product colour | white |
| Measuring rate | Dependent on Cloud licence; Basic: 15 min … 24 h / Advanced: 1 min … 24 h |
| Communication rate | Dependent on Cloud licence; Basic: 15 min … 24 h / Advanced: 1 min … 24 h |
| WLAN Connectivity | supported wireless LAN standards: IEEE 802.11 b/g/n and IEEE 802.1X; Possible encryption methods: WPA2 Enterprise: EAP-TLS, EAP-TTLS-TLS, EAP-TTLS-MSCHAPv2, EAP-TTLS-PSK, EAP-PEAP0-TLS, EAP-PEAP0-MSCHAPv2, EAP-PEAP0-PSK, EAP-PEAP1-TLS, EAP-PEAP1-MSCHAPv2, EAP-PEAP1-PSK, WPA Personal, WPA2 (AES), WPA (TKIP), WEP |
| Alarm function | LED (traffic light function: red, yellow, green) |
| Battery life | 1 year |
| Display type | LCD (Liquid Crystal Display) |
| Power supply | 4 x AA batteries 1.5 V, alternatively mains unit via USB connection |
| Interface | USB |
| Radio range | 100 m |
| Memory | 32,000 Measuring values / Sum of all channels |
| Storage temperature | 0 to +50 °C |
| Dimension display | 55 x 42 mm |
IN THE BOX:
- WiFi data logger testo 160 IAQ
- Free Cloud access (basic functionality)
- USB mains unit
- USB interface cable
- Wall bracket, including tool and adhesive strip
- QR code sticker
- Short instructions
- Calibration protocol
The Testo Cloud is the core operating element for setting up the testo Saveris 2 system. Configure the WiFi data loggers, set limit value alarms, analyse measurement data and access all measuring values and analysis functions anywhere, and at any time with an internet-capable smartphone, tablet or PC. Register at saveris.net to access the Testo Cloud.
There are two testo Cloud Saveris packages. The Basic package is available for free with all instruments when logged into the Cloud. All users can upgrade to the paid Advanced package through their account by clicking on the ‘Advanced Licence’ button and activating the licence.
SupplyMe offers specialist advice in selecting your safety instruments. Please give us a call on 0800 080 4657 or email us on [email protected]. We are here to help.